Toyota Camry Rims Set of 4: OEM Sizes by Year, Trim & Fitment

If you're replacing all four wheels on a Toyota Camry — after curb damage, a corrosion problem, or just because the originals look tired — buying a matched set of 4 OEM Camry rims is almost always the right move. Mixing aftermarket wheels with factory wheels can throw off your spare's fitment, mess with TPMS sensor seating, and look uneven across the car. A complete set keeps everything balanced, original, and right-sized for the trim you already drive.

This guide covers OEM rim sizes for every Camry generation from 2007 to today, fitment specs you need before ordering, and what to expect when you buy a full set at OEM Wheel Shop.

Why Buy a Set of 4 OEM Camry Rims Instead of Aftermarket

Toyota engineered the Camry's suspension, steering geometry, and brake clearance around factory wheel dimensions. When the wheels match those specs exactly, ride quality stays predictable and the TPMS reads correctly without recalibration headaches.

Three reasons most Camry owners go with a full OEM set:

• Identical finish across all four corners. Aftermarket "machined and silver" finishes never quite match factory paint and clear coat. Buying four refinished OEM wheels from the same supplier eliminates that.
• Correct load rating. Camry OEM wheels carry a load rating that matches the car's GVWR. Some aftermarket sets are lower-rated and not technically legal for daily use on a family sedan.
• Resale value holds. Buyers checking Carfax notice non-OEM wheels and use it as a price negotiation point. Factory wheels keep the car closer to "stock" condition.

Toyota Camry OEM Wheel Sizes by Generation

Camry has used five major wheel diameters since 2007: 16-inch, 17-inch, 18-inch, and 19-inch. The specific size depends on generation and trim level. Here's the breakdown that matters for finding a set of 4.

2007–2011 Camry (XV40, including Hybrid)

• LE / Hybrid: 16x6.5 inch steel or alloy
• SE: 17x7 inch alloy, five-spoke design
• XLE: 16x6.5 inch alloy, multi-spoke

Bolt pattern across all XV40 trims is 5x114.3mm with a 60.1mm hub bore and offset around +45mm. If you're replacing wheels on a 2009 SE, you want the 17-inch five-spoke set — not the LE 16-inch, even though they bolt up. Tire size differs (215/60R16 vs 215/55R17), so mixing them changes speedometer reading.

2012–2017 Camry (XV50)

• L / LE / Hybrid LE: 16x6.5 inch alloy or steel
• SE: 17x7.5 inch alloy (2012–2014) or 18x7.5 inch alloy (2015–2017)
• XLE: 17x7 inch alloy
• XSE (2015–2017): 18x7.5 inch dark-finish alloy

The 2015 mid-cycle refresh introduced two-tone finishes on SE and XSE wheels — black pockets with machined face. These are easy to identify but harder to find in matched sets because owners often refinish individual wheels after curb rash, breaking up original sets.

2018–2024 Camry (XV70)

• L / LE / LE Hybrid: 16x6.5 inch or 17x7 inch alloy
• SE / SE Hybrid: 18x8 inch black-painted alloy
• XLE / XLE Hybrid: 17x7 inch or 18x8 inch alloy
• XSE / TRD: 19x8 inch alloy (TRD uses matte-black finish)

XV70 wheels switched to a 5x114.3mm pattern with a 60.1mm hub bore and offset typically around +50mm. The 2020 TRD trim introduced a flow-formed 19-inch wheel that's lighter than the standard XSE wheel by about three pounds per corner — these are sought after and command a higher resale price even as used OEM.

2025+ Camry (XV80, hybrid-only)

The 2025 redesign made every Camry a hybrid. Wheel sizes:

• LE: 17x7 inch alloy
• SE: 18x8 inch black alloy
• XLE: 18x8 inch machined alloy
• XSE: 19x8 inch dark-painted alloy

If you own a 2025 model and a wheel is damaged, OEM replacement availability is still tight in the aftermarket as of 2026. Stock at most refurbishers is concentrated on XV70 and earlier.

Fitment Specs You Need Before Buying a Set of 4

Before ordering, gather four numbers from your existing wheel or owner's manual:

1. Diameter and width: for example, 18x8 inches. Stamped on the back of the wheel.
2. Bolt pattern: 5x114.3mm for every Camry from 2002 forward.
3. Offset (ET): the distance between the wheel's mounting face and its centerline. Stamped near the valve stem hole on most factory wheels, usually written as ET40, ET45, or ET50.
4. Center bore: 60.1mm on all modern Camry wheels.

Match all four and you will not need hub-centric rings, spacers, or extended lug nuts. The set will install with your existing TPMS sensors and lug hardware.

What About TPMS Sensors?

Camry TPMS sensors live inside the tire on the valve stem. When you buy a set of 4 OEM wheels from OEM Wheel Shop, we ship the wheels without tires or sensors unless you request otherwise. Most installers swap your existing sensors over during mounting — typically 5 to 10 minutes per wheel. A relearn procedure resets the system after installation.

If your current sensors are older than seven years, plan to replace them at the same time. Battery life on factory sensors averages 5–10 years, and replacing them while the tire is already off the wheel saves labor.

New OEM, Refurbished OEM, or Used OEM — Which Set to Buy

OEM Wheel Shop carries all three tiers. The right choice depends on budget, vehicle age, and how long you plan to keep the car.

New OEM (Toyota dealer-sourced)

Brand-new, never-mounted wheels straight from Toyota's parts supply. Best for newer Camrys still under warranty or for owners who want zero compromise. Lead time can run 2–6 weeks depending on the specific part number and regional inventory.

Refurbished OEM

Factory wheels that came back to a refinisher with curb damage, light corrosion, or scratched clear coat. They are straightened, welded if needed, repainted to original color codes, and clear-coated. Visually indistinguishable from new in most cases. This is the most popular option for Camrys 3–10 years old. Lead time is usually 1–3 business days because most sizes stay in stock.

Used OEM

Factory wheels pulled from low-mileage vehicles (often crash recoveries or trade-ins). Sold in true used condition with minor wear noted in product photos. Best for older Camrys where you want OEM authenticity without paying refurbishment costs. Lead time matches refurbished — same-day or next-day shipping for in-stock sets.

How Much Does a Set of 4 Camry Rims Cost?

Pricing varies by generation, trim, and condition tier. Generally:

• 16-inch alloy sets (LE trims): the lowest tier, typically the most affordable for matched sets
• 17-inch alloy sets (XLE and older SE): mid-range, broad inventory available
• 18-inch alloy sets (XV70 SE/XLE, XV80 SE/XLE): higher demand, slightly higher pricing
• 19-inch XSE and TRD wheels: top tier, lower inventory, premium pricing

For exact pricing on a specific year and trim, check the product page or message us with your VIN. Pricing includes the full set of 4 plus standard ground shipping within the lower 48 states.

Common Camry Rim Questions

Can I put 18-inch SE wheels on an LE Camry?

In most cases yes, mechanically. Bolt pattern, hub bore, and offset are compatible across trims within the same generation. You'll need to also match tire size to maintain correct speedometer reading — usually 215/55R17 LE owners going to 18-inch SE wheels move to 235/45R18 tires.

Are Camry Hybrid wheels different from gas Camry wheels?

No. Wheel specs are identical across hybrid and gas Camry models within the same generation and trim. A 2022 Camry XLE Hybrid takes the same 17-inch or 18-inch OEM wheel as a 2022 Camry XLE gas model.

Do you sell Camry steel wheels?

Yes, primarily for XV40 and XV50 LE trims. Steel wheels were standard on base models and are popular for winter setups. They're typically the most affordable option for a set of 4.

What if only one wheel is damaged?

You don't have to buy a full set. We sell individual OEM Camry wheels and ship them with matched finish to your existing wheels whenever possible. Send a photo of your current wheel and the part number, and we'll match it.

How to Order a Set of 4 Camry Rims at OEM Wheel Shop

The fastest path:

1. Find your year and trim on our Camry collection page
2. Confirm size (16, 17, 18, or 19 inch) and finish
3. Select "set of 4" if shown, or add four units to cart
4. Check out with standard ground shipping (free in the contiguous U.S.) or upgrade to expedited

If you can't find your exact wheel, send your VIN or a photo of the wheel through our contact form. We pull OEM inventory daily from refinishers across the country and can usually locate the right part within 24 hours.

Every set ships in protective packaging with corner blocks to prevent shipping damage. If any wheel arrives with cosmetic issues, our return and replacement policy covers free reshipment.

Final Thought on Matched OEM Sets

A set of 4 OEM Camry rims is the closest you can get to factory-fresh without buying a new car. Driving a 2010 LE, a 2018 SE Hybrid, or a 2025 XSE — the same logic applies: match the wheels to the trim, the trim to the suspension, and the suspension to the driving feel Toyota designed. The car will look right, ride right, and hold its resale value better than a one-off aftermarket setup. Order a complete set and skip the headache of mismatched corners.